Canon 2010F manual Polling Sending, Polling Box Settings Table

Using Polling

9

Polling Sending

This section shows you how to set up your machine to store and hold a document until it is polled by another fax machine to send it.

Polling Box Settings Table

Before you set up your polling box, contact the parties who are going to poll your machine to receive documents and confirm the following points:

•The other parties must know your ITU-T subaddress number.

•If you are also using an ITU-T password for the polling box, they must also know this password. This password setting is optional.

•Your TX PASSWORD must match the ITU-T password attached when the other party calls you. Confirm that the TX PASSWORD on your fax machine matches the ITU-T password attached when the other party calls you.

•If the other party's fax does not support ITU-T subaddress/password transactions, you may be able to use polling box 00.

You can set the following for a polling box:

Item	Description	Setting
01 FILE NAME	Sets up the name of the poling box.	Up to 24 letters
		and numbers
	Sets up the password that protects the settings of the
	polling box. If you open this polling box to view or make
02 PASSWORD	changes, you have to enter this password.You also have	Up to 7 digits
	to enter this password to print a document received in
	the polling box.
	Sets up the ITU-T subaddress. The sending party must	Up to 20 letters
03 SUBADDRESS	enter the correct ITU-T subaddress to poll your
		and numbers
	machine. This setting is required.
	Sets up the ITU-T password for your polling box. This
04 TX PASSWORD	setting is optional. However, if you set an ITU-T	Up to 20 letters
	password for your polling box, the calling party must	and numbers
	enter the correct password to poll your machine.
05 ERASE AFTER TX	Tells the machine how to handle the document after it is	OFF, ON*
	polled and sent.

An asterisk (*) indicates the default setting.

9-22Polling Sending