Canon BJC-2100 - page 303

303Using the Scanner With Macintosh

Scanning Images With Application Software

This section explains how to start IS Scan from a TWAIN image editing application software

so that you can scan images.

■ Selecting a TWAIN-compatible Device

Before you scan images with application software, you must ﬁrst select a TWAIN-

compatible device using the BJC-2100 driver. The basic procedure is described below

(steps may vary based on your application software).

1Start the application software and then select New... from the File menu.

Then, open the menu you use to scan images. Install the scanner

cartridge in the printer.

2To open the dialog box for selecting a TWAIN-compatible input device, you

normally select Import and then select TWAIN Select... from the File

menu. The “Select a source” dialog box is displayed.