122 Scheduling Reports
You must enter the directory name and the file name for each report.
Also, for multiple entries, be sure to include spaces between each
directory\filename combination.
Log. The Log check box is disabled for the PrintRpt command. All
print jobs submit log entries to the ICRPRINT.LOG file. The print
job log entries chronicle the progress of each print job executed by
the job scheduler. The ICRPRINT.LOG file is described later in this
section.
The following example shows a Job Details dialog box set up to
print a report every Monday at 8:00 A.M.
À To submit a print job schedule:
1. Click the Apply button. You are returned to the ICR Job Scheduler
window. The new entry appears in the window.
2. (Optional.) At this point, if you decide that you do not want to
submit the print job, you can click Reset to return the ICR Job
Scheduler settings to their original state (that is, to the settings in
place when you opened the job scheduler).
3. Important. Click the Apply button in the ICR Job Scheduler
window. This submits the job in the ICR Job Scheduler.
Notice that the value in the Time field changes from 24-hour format
to A.M. or P.M. You can use this as an indicator that the job has
been successfully submitted.
The print job will execute on the specified date and time.
6.1.3. Changing Scheduled Jobs
You can change a scheduled job at any time. For example, you might
want to print a different report, or change the frequency with which a
report is printed. You can use the Job Scheduler to change only PrintRpt
jobs. You cannot change jobs that were scheduled through the DOS AT
command.