Cisco Systems ICM Software Version 4.5 ICR Directory. Shows the drive and directory where the ICR, ICR Instance AW Directory. Displays the ICR, customer, and, Refresh Rate. Lets you set the rate in seconds at which the, Background Color. Lets you set the background color of, Real-Time Feed Failures Before Exit. Lets you set the number

Setting Workstation Preferences 103
4. Reporting Basics
À To change workstation preferences:
1. Choose Options→Preferences. The Preferences dialog box appears:
2. Change the workstation preferences using the following guidelines:
Note: These guidelines vary based on the type of AW.
 ICR Directory. Shows the drive and directory where the ICR
software resides.
 ICR Instance AW Directory. Displays the ICR, customer, and
Admin Workstation directories for this AW.
 Refresh Rate. Lets you set the rate in seconds at which the
Admin Workstation is updated with real-time data. This value
also affects the rate at which the Controller Time is updated. For
Standard, Network, and Limited AWs, the default value is 15
seconds; the minimum value you can enter is 10. For monitor-
only AWs, the default value and minimum value is 30 seconds.
 Background Color. Lets you set the background color of
Monitor ICR reports. You can set the red, green, and blue values
to numbers between 1 and 255. Enter the numbers directly or
highlight the values and increment them by using the up and
down arrows. After you change a value, move the cursor to
another field to see the new color in the preview box on the
right.
 Real-Time Feed Failures Before Exit. Lets you set the number
of real-time feed failures that Monitor ICR must detect before it
requests a restart. You can enter any value from 1 to 999 in this
field. The default value is 20. This value is multiplied by the
Refresh Rate. For example: