Chapter 5 - DECnet Routing & Bridging | 95 |
|
|
•If it is set to DECnet Off, then any DECnet packets received on this interface are discarded.
DECnet: WAN Configuration Dialog Box
DECnet: WAN Configuration Dialog Box
To access this dialog box, select WAN/DECnet Routing in the Device View.
ϖNote: Compatible Systems routers provide DECnet Phase IV Level 1
>DECnet On/Bridging/Off
This set of radio buttons controls how DECnet packets are handled for this interface.
• If set to DECnet On, then DECnet packets received on this interface are routed to the correct interface on the router.
• If set to DECnet Bridging, then any DECnet packets received on this interface are forwarded to the router’s internal bridge. This setting makes this WAN interface a member of the “DECnet Bridge Group” for this router.
ϖNote: The DECnet Bridging radio button will be grayed out unless bridging has been turned on globally for the device using the Main Bridging Configuration Dialog Box (under Global/Bridging) and locally on this inter- face using the Bridging: WAN Dialog Box (under WAN/Bridging).
•If it is set to DECnet Off, then any DECnet packets received on this interface are discarded.
