250 | Chapter 14 - General |
|
|
Add LDAP Server Dialog Box
LDAP Config Name
This specifies a name which uniquely defines this LDAP configuration. It can be up to 16 characters long.
Enable LDAP
This checkbox enables this entire section. If checked, the settings from this section will be used to get a configuration from an LDAP server. If left unchecked, no settings from this section will be used.
Primary Server
This sets the IP address (e.g., 192.168.9.99) or fully qualified domain name (e.g., monkeywrench.com) of the primary LDAP server which contains the configuration.
Primary Password
This string is used to authenticate the device to the primary LDAP server. If this is not set, then the device will attempt an anonymous bid to the server. The Primary Password may be up to 32 characters long.
