Compatible Systems 5.4 manual IntraGuard Firewall Configuration, 131

Chapter 8 - IntraGuard Firewall Configuration 131

Chapter 8 - IntraGuard Firewall Configuration

There are three pre-set paths in the IntraGuard Firewall. A path defines a route for packets through the firewall. Each of the three paths already has a name, a security policy and interface definitions. While the names and param- eters of the firewall paths can be modified, the default settings should work for many installations.

Firewall paths can be added to the edit area of a device, renamed or deleted.

To Add a path, right-click on any configuration item for the device, then select Firewall Path/Add Firewall Path from the popup menu.

ϖNote: The IntraGuard Firewall currently supports up to three firewall paths. Any additional paths may cause configuration problems. It is recom- mended that you add firewall paths only if you have previously deleted a path, so that no more than three paths exist at a time.

To Rename a path, right-click on the path’s icon, then choose Firewall Path/Rename Firewall Path

To Delete a path, right-click on the path’s icon, then choose Firewall Path/Delete Firewall Path.

These functions are also available in the File menu.