Compatible Systems 5.4 manual VPN Group Configuration IPX Connection Tab, VPN Client Tunnels 119

Chapter 7 - VPN Client Tunnels 119

VPN Group Configuration IPX Connection Tab

VPN Config IPX Connection Tab

>Local IPX Net

This edit box specifies the entry of the first local IPX network number to be assigned to client sessions under this configuration. This address will be incremented by one for each new client session, until the Max Connection limit (specified on the General Tab) is reached. When a client is connected to the device, the first available IPX address from this range is assigned to that session. The IPX address is freed when the client session is finished.

Each of the addresses thus generated must be a valid, unique and unused IPX address. Also, these addresses must not conflict with any networks specified in other VPN Group configurations or with any other IPX address within the server.

ϖNote: There is no default value for the Local IPX Net. In order for

IPX-in-IP tunneling to operate with this VPN Group configuration, a group of local IPX addresses must be set using either the Local IPX Net, or a RADIUS server must be configured to serve the addresses (see Assign IPX Radius).

Block Type 20

In order for certain protocol implementations, like NetBIOS, to function in the NetWare environment, routers must allow a broadcast packet to be prop-