![](/images/new-backgrounds/1263506/26350645x1.webp)
Chapter 1 - Installation and Overview | 17 |
|
|
OSPF Neighbors
This menu item displays an abbreviated list of current neighbors an their state. This is equivalent to the command line’s show ospf nbr command. (See the ospf(show) section)
Buffer
This menu item displays detailed information on the current status of the device’s memory allocation and is the equivalent of the command line’s show os memory command. (See the os(show) section.)
Show Restart Info
This menu item displays detailed information about the status of the device when the last restart event occurred, and is the equivalent of the command line’s show os resevent command. (See the os(show) section.)
Device Log
This menu item displays the log buffer, and is the equivalent of the command line’s show system log buffer command. (See the system(show) section.)
Command Line Interface
This menu item allows you to enter other show commands in the Command Line entry box, as described below.
Reset Statistics
This menu item sends a command to the current device which causes it to reset all of its statistic counters.
The Command Line Edit Box
The Command Line Edit Box
This box is both a
ϖNote: Other types of commands (e.g., reset, add, etc.) are not fully supported by CompatiView. Only show commands should be used.