Compatible Systems 5.4 manual IP Connection Dialog Box, IP On/IP Off

Chapter 2 - IP Routing & Bridging 43

ϖNote: Subinterfaces are only allowed on WAN ports configured for Frame Relay operation. They are not allowed on WAN ports configured for PPP. Frame Relay Glacis must be statically mapped when subinterfaces are in use, because IARP can only resolve a physical port, not a logical subinterface on that port.

IP Connection Dialog Box

IP Connection Dialog Box

The IP Connection Dialog Box controls the IP settings for the IPSec-only port on an IntraPort VPN Access Router with two or more Ethernet interfaces. This port will only handle IPSec traffic (i.e., authenticated and/or encrypted packets).

To access this dialog box, select Ethernet/TCP/IP Routing from the Device View.

>IP On/IP Off

This set of radio buttons controls how IP packets are handled for this inter- face.

•If set to IP On, then IPSec packets received on this interface are routed to the correct interface on the router.

•If set to IP Off, then any IP packets received on this interface are discarded.