Chapter 14 - General | 227 |
|
|
To access this dialog box, select Global/System Configuration from the Device View.
>Device Name
This is the name which is used to advertise this device on both AppleTalk and IPX networks. Thus, it is the name CompatiView displays in the Open - Device screen (accessed from the File menu).
>Password
This is the main password used to access the device from CompatiView and from the command line (either Telnet or auxiliary port operation). This login level will allow a user to display tables and statistics, but does not permit a user to view or make any changes to the configuration.
ϖ Note: If you lose the password for a Compatible Systems device, you can enable the default letmein password for five minutes by setting the switch marked “Test” or “Mode” on the back of the device to 9 and restarting the device. Make sure you set the switch back to 0 after you have set a new pass- word into the device.
>Confirm Password
This box is used to confirm the entered Password.
>Enable Password
This password will enable supervisor mode for viewing or making changes to a device’s configuration. If no Enable Password is created, then the Pass- word will be used.
>Confirm Enable Password
This box is used to confirm the entered Enable Password.