Chapter 1 - Installation and Overview | 7 |
|
|
Download Config to Device Dialog Box
Save / Restart Options
The settings in this dialog box are specific for this device. For global Save/Restart settings use the Database menu, select options, and choose the Save/Restart tab. To change the Save/Restart mode for a particular device, modify the “Device Properties” for that device.
•Save config and restart device. This parameter will save an edited configuration to the device’s Flash ROM and restart the device to apply the changes. This is the equivalent of the command line’s save command.
•Save config, but don’t restart device. This parameter will save an edited configuration without restarting the device. The changes will not be applied until the device is restarted. This is the equivalent of the command line’s write command.
•Don’t save config, but use new config immediately. This parameter will apply an edited (but not saved) configuration to the device’s current operations. If a restart occurs, changes will be lost. This is the equivalent of the command line’s apply edited command.
•Save config and use immediately without restarting. This parameter will save an edited configuration and immediately apply it to the device’s
