![](/images/new-backgrounds/1263506/26350639x1.webp)
14 | Chapter 1 - Installation and Overview |
|
|
The Output Window
The CompatiView Output Window
There is an Output Window at the bottom of the Device View which lets you quickly check the current status of the selected configuration parameter or review the device configuration. The tabs show different types of parameter values. In some cases, these parameters may be different than those stored in the device’s Flash ROM due to
The Output Window is broken up into three tabbed sections.
•The Local Config View tab displays the complete device configuration and will reflect any changes you have made in the edit area for a device.
•The Device Information tab displays the hardware configuration of the device.
•The Command Line Output tab is where output from the Statistics menu options will appear. This tab also displays information currently in effect on the device.
The Statistics Menu
This menu allows you to display protocol routing tables and other information for a device. The output from these options is displayed in the Command Line Output tab in the Output Window. The specific menu options available depend on the current device type.
The first set of menu items displays the same information that is available when using certain commands within the command line interface. Refer to the section in the
ϖNote: If you are experienced with internetworking devices, the information in these windows will be familiar to you. If you are not, this information can