Fortinet 3.0 MR4 manual What’s new, Bypassbounceverify

What’s new

What’s new

The table below lists commands which have changed since the previous release, 3.0 MR3.

Command	Change
execute partitionlogdisk	New command. Sets the size of the hard disk
	partition to use as the log disk. Remaining hard
	disk space is used as the mail disk.
set as bounceverify	New command. Configures verification of
	delivery status notification (DSN) email.
set as mms_reputation	New command. Sets the window of time during
	which detection of multimedia message service
	(MMS) spam will affect the sender reputation of
	the end user ID (MSISDN).
set as profile modify rewrite_rcpt	New command. Configure rewriting of the
	recipient email address located in the envelope
	if the email message is detected as spam.
set ip_profile headermanipulation	New command. Removes specified message
	headers.
set ip_profile mms_reputation	New command. Enables or disables detection
	of spam based upon the sender reputation of
	the end user ID (MSISDN) for multimedia
	message service (MMS) email messages, and
	configures its detection threshold and duration.
set ip_profile sendervalidation	New keyword. Enables or disables bypass of
bypassbounceverify	verification of delivery status notification (DSN)
	email.
set ip_profile_setting rate_control	New command. Selects whether to rate control
	email messages by either the number of email
	messages or the number of SMTP connections.
set mailserver access ... authenticated	New keyword. Selects whether to apply the
	access control rule to only authenticated SMTP
	sessions, or regardless of authentication
	status.
set mailserver access ... tlsprofile	New keyword. Selects the name of a transport
	layer security (TLS) profile to apply to SMTP
	sessions governed by this access control rule.
set mailserver smtp ldap_domain_check	New command. Enables or disables use of an
	LDAP query to verify the existence of a domain
	and to automatically associate it with a
	protected domain.
set mailserver smtpauth smtp	New keyword. Enables or disables SMTP
	authentication.
set mailserver smtpauth smtpovertls	New keyword. Enables or disables transport
	layer security (TLS) authentication for SMTP.
set mailserver smtpauth smtps	New keyword. Enables or disables SMTPS
	authentication.
set policy modify add_association	New command. Configures domain
	associations, which associate a domain name
	with the settings for an existing protected
	domain.

FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference

06-30004-0420-20080814 19