Fortinet 3.0 MR4 manual 317

set system ha {cpeer interface peer secondary-interface secondary-peer}

Enter the following commands from an active-passive HA backup unit to set port5 as the primary heartbeat interface, set the primary heartbeat local heartbeat interface IP address and netmask to 10.0.0.2 255.255.255.0, and set the primary heartbeat peer IP address to 10.0.0.1.

set system ha interface port5 10.0.0.2 255.255.255.0 set system ha peer 10.0.0.1

Example: add a secondary heartbeat local and peer IP address for an active-passive HA group

This example adds a secondary heartbeat local and peer IP addresses to the FortiMail units in the previous example.

Enter the following commands from an active-passive HA primary unit to set port4 as the secondary heartbeat interface, set the secondary heartbeat local IP address and netmask to 10.1.1.1 255.255.255.0, and set the secondary heartbeat peer IP address to 10.1.1.2.

set system ha secondary-interface port4 10.1.1.1 255.255.255.0 set system ha secondary-peer 10.1.1.2

Enter the following commands from an active-passive HA backup unit to set port4 as the secondary heartbeat interface, set the secondary heartbeat local heartbeat interface IP address and netmask to 10.1.1.2 255.255.255.0, and set the secondary heartbeat peer IP address to 10.1.1.1.

set system ha secondary-interface port4 10.1.1.2 255.255.255.0 set system ha secondary-peer 10.1.1.1

History

FortiMail v3.0 New.

FortiMail v3.0 MR2 Added secondary-interface and secondary-peer keywords that you use for configuring secondary heartbeat settings. In previous versions of FortiMail you used the interface and peer keywords for configuring HA heartbeat settings. In FortiMail v3.0 MR2 you use the interface and peer keywords for configuring primary heartbeat settings.

Related topics

•set system ha config

•set system ha data

•set system ha datadir

•set system ha lservice

•set system ha mode

•set system ha monitor

•set system ha on-failure

•set system ha passwd

•set system ha remote-as-heartbeat

•set system ha {restart restore resync}

•set system ha rservice

•set system ha takeover

FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference

06-30004-0420-20080814 317