Fortinet 3.0 MR4 Set system ha interface port5 10.0.0.2, Set system ha interface port5 10.0.0.3

system ha {cpeer interface peer secondary-interface secondary-peer} set

Keywords/Variables	Description	Default
<secondary-interface_str>	The name of the network interface to be used for the
	secondary heartbeat.
<secondary-peer_ipv4>	The secondary heartbeat IP address for the other	0.0.0.0
	FortiMail unit in the HA group. This is the IP address that	0.0.0.0
	the FortiMail unit secondary heartbeat expects to be able
	to connect to find the other FortiMail unit in the HA group.
	secondary-peer_ipv4of the primary unit must match
	the secondary-local_ipv4of the backup unit. You
	could set the secondary-peer_ipv4on the primary
	unit to 10.1.1.2.
	secondary-peer_ipv4of the backup unit must match
	the secondary-local_ipv4of the primary unit. You
	could set the secondary-peer_ipv4of backup unit to
	10.1.1.1.

Example: configuring primary heartbeat local and peer IP address for a config only HA group

This example describes how to configure primary local and peer IP addresses for a config only HA group consisting of one primary unit and three backup units.

•Enter the following commands from a config only HA primary unit to set port5 as the primary heartbeat interface, set the primary local HA heartbeat IP address and netmask to 10.0.0.1 255.255.255.0, and add three backup units to the peer list. The primary heartbeat local addresses of the backup units to be added to the peer list are 10.0.0.2, 10.0.0.3, and 10.0.0.4.

set system ha interface port5 10.0.0.1 255.255.255.0 set system ha cpeer 1 10.0.0.2

set system ha cpeer 2 10.0.0.3 set system ha cpeer 3 10.0.0.4

•Enter the following command from the first config only HA backup unit to set port5 as the primary heartbeat interface and set the primary heartbeat local IP address and netmask to 10.0.0.2 255.255.255.0.

set system ha interface port5 10.0.0.2 255.255.255.0

•Enter the following command from the second config only HA backup unit to set port5 as the primary heartbeat interface and set the primary heartbeat local IP address and netmask to 10.0.0.3 255.255.255.0.

set system ha interface port5 10.0.0.3 255.255.255.0

•Enter the following command from the third config only HA backup unit to set port5 as the primary heartbeat interface and set the primary heartbeat local IP address and netmask to 10.0.0.4 255.255.255.0.

set system ha interface port5 10.0.0.4 255.255.255.0

Example: configuring primary heartbeat local and peer IP address for an active-passive HA group

This example describes how to configure primary heartbeat local and peer IP addresses for an active-passive HA group consisting of one primary unit and one backup unit.

Enter the following commands from an active-passive HA primary unit to set port5 as the primary heartbeat interface, set the primary heartbeat local IP address and netmask to 10.0.0.1 255.255.255.0, and set the primary heartbeat peer IP address to 10.0.0.2.

set system ha interface port5 10.0.0.1 255.255.255.0 set system ha peer 10.0.0.2

	FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference
316	06-30004-0420-20080814