system time ntp | set |
system time ntp
Use this command to set and configure system time settings using network time protocol (NTP).
Syntax
set system time ntp dst {disable enable} ntpserver <ipv4 hostname> ntpsync {disable enable} syncinterval <sync_interval> zone <zone_num>
Keywords and Variables | Description |
|
|
dst {disable enable} | Enable or disable daylight saving time (DST). |
ntpserver <ipv4 hostname> | Enters NTP server IP or hostname. |
| • <ipv4> is the NTP server IP address. |
| • <hostname> is the NTP server hostname |
|
|
ntpsync {disable enable} | Enable to synchronize the FortiMail unit with the NTP server. |
syncinterval <sync_interval> | Enter the system synchronization time interval from one to 1440 |
| minutes. |
zone <zone_num> | Enter the required time zone by number. Use ‘?’ to see a list of zone |
| names and their numbers. |
History
FortiMail v3.0 | New. |
Related topics
•set system time manual
| FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference |
344 |
