|
|
set | system route number |
system route number
Use this command to set and configure system routing.
Syntax
set system route number <route_int> dev1 {auto port1} dst <route_ip4> <mask_ip4> gw1 <gway_ip4>
Keywords and Variables | Description |
|
|
number <route_int> | Enter the number of the route in the routing table. The default route is 0. |
dev1 {auto port1} | Sets the FortiMail |
| In auto, the FortiMail unit routes traffic to the interface that is on the same subnet |
| as gw1. |
|
|
dst <route_ip4> | Sets the FortiMail unit route destination IP address and IP address mask. |
<mask_ip4> | <route_ip4> is the destination IP address. <mask_ip4> is the IP address mask. |
gw1 <gway_ip4> | Sets the FortiMail unit route primary gateway IP address. |
| <gateway_ipv4> is the primary gateway IP address. |
History
FortiMail v3.0 | New. |
Related topics
•set system interface config
•set system interface mode static
FortiMail™ Secure Messaging Platform Version 3.0 MR4 CLI Reference |
|
339 |
