P.3 Fatal Error and error_state Transition Error

P.3.1 ASI_STCHG_ERROR_INFO

The ASI_STCHG_ERROR_INFO register stores detected FATAL error and

error_state transition error information, for access by OBP (Open Boot PROM) software.

[1]Register name:

[2]ASI:

[3]VA:

[4]Error checking:

[5]Format & function:

[6]Initial value at reset:

[7]Update policy:

ASI_STCHG_ERROR_INFO

4C16

1816 None

See TABLE P-10

Hard POR: All fields are set to 0.

Other resets: Values are unchanged.

Upon detection of each related error, the corresponding bit in ASI_STCHG_ERROR_INFO is set to 1. Writing 1 to bit 0 erases all error indications in ASI_STCHG_ERROR_INFO (sets all bits in the register, including bit 0, to 0).

TABLE P-10describes the fields in the ASI_STCHG_ERROR_INFO register.

TABLE P-10Format of ASI_STCHG_ERROR_INFO Bit Description

Bit

Name

RW

Description

 

 

 

 

63:34

Reserved

R

Always 0.

33

ECR_WEAK_ED

R

ASI_ERROR_CONTROL.WEAK_ED is copied into this

 

 

 

field at the beginning of a POR or watchdog reset.

32

ECR_UGE_HANDLER

R

ASI_ERROR_CONTROL.UGE_HANDLER is copied into

 

 

 

this field at the beginning of the POR or watchdog

 

 

 

reset.

31:15

Reserved

R

Always 0.

14

Always 0 (EE_OTHER)

R

In the ideal case, EE_OTHER would be assigned in this

 

 

 

bit, but the field is not implemented in SPARC64 V.

13

EE_TRAP_ADDR_UNCORRECTED_ERROR

R

Upon detection of the corresponding error, set to 1.

12

EE_OPSR

R

Upon detection of the corresponding error, set to 1.

11

EE_WATCH_DOG_TIMEOUT_IN_MAXTL

R

Upon detection of the corresponding error, set to 1.

10

EE_SECOND_WATCH_DOG_TIMEOUT

R

Upon detection of the corresponding error, set to 1.

 

 

 

 

Release 1.0, 1 July 2002

F. Chapter P Error Handling 163

Page 174
Image 174
Fujitsu Fujitsu SPARC64 V manual Fatal Error and errorstate Transition Error, 4C16, Always 0 Eeother