Honeywell EN2Z-0906GE51 R0708 manual Override Datapoint Value, Show Datapoints in Manual Override

ARENA / RANGER USER GUIDE

2.To change a value, click on the value in the Value/Unit column. In the Value dialog box, enter new value in the New Value field. Click Apply button, then click OK button.

3.To enter an alias name for a property name, click the Configure icon at the end of the row. In the Configure dialog box, enter the alias name in the Alias field. Click OK.

NOTE:	It is forbidden to use the slash character ”/” in alias names because
	this may result in an unexpected behavior of ARENA.

4.To print a datapoint properties list, check all properties (Multi-selection using CTRL key is possible), you want to add to the printed list.

5.Click Print.

The list is built up in a new dialog.

6.Click Print.

7.In the Print dialog box, select the printer and desired options and click Print.

Override Datapoint Value

1.In the Value/Unit column, click the value of the datapoint you want to override.

2.In the Value dialog box, enter the new value in the New Value field.

3.Click Apply.

4.Click OK.

The datapoint value is updated as displayed in the list. If the Manual column is available, the datapoint is checked as Manual (overridden).

NOTE: Online changes will be stored in the controller RAM only.

Show Datapoints in Manual Override

This function allows getting an overview of any datapoints that are currently in manual mode.

1.If not already done, display the Manual column in the datapoints list. To configure the list display, please refer to “List Display Configuration” in the “Basic Functions” section.

EN2Z-0906GE51 R0708 70