
USER GUIDE | ARENA/ RANGER |
List Display Configuration
A list configuration, for example of a datapoints list, always applies to all lists of the same kind (in this case all datapoints list) on the same level (site, device, plant, segment). The appearance of a list, for example, a datapoints list, can be defined by configuring the following:
•Display columns
Defines, which columns are displayed and in which order the columns are displayed
•Sort order
Defines the default sort sequence (ascending or descending) within a column
•Default filter
Defines which filter is used by default for the list display
NOTE: | The filter definitions apply to all local users of the ARENA. |
1.At the bottom of the list, click the Configuration button. The Variable List Configuration dialog box displays.
2.To configure the columns displayed and their sort sequence, click the Display Columns tab.
Under Available columns, all columns that can be displayed at maximum are listed. Under Displayed Columns, all currently displayed columns are listed. The column display will be configured by moving the columns between the Available Columns and Displayed Columns tables using the angle brackets under Available Columns. The sort sequence of the displayed columns will be configured by using the upward and downward buttons under Displayed Columns.
3.To select the columns to be displayed and their sort sequence, move columns between the tables and determine sort sequence by doing one of the following:
a.To move single column(s),
In the Available Columns list or in the Displayed Columns table, highlight the columns to be moved. Multiselection by using the CTRL key is possible.
b.Click the single angle bracket button of the desired direction. Or,
c.To move all column(s) in one step,
Click the double angle bracket button of the desired direction.
d.To set the sort sequence, that is, the position of the columns within the displayed list, highlight the column in the Displayed Columns table. Multiselection by using the CTRL key is possible.
21 |