USER GUIDE

ARENA/ RANGER

In the iLON 10 configuration (section "PPP"), this setting will be stored as "Modem Init String". The default is E0Q0V1S0=0&C1M1&W.This setting works for the supported modems.

Wait for dial tone before calling

If enabled, the modem connected to the iLON 10 will wait for the dial tone. Default = yes. If no connection can be established, the telephone installation might not provide a correct dial tone. In this case, disable the option.

This information is appended to the Init string in the iLON 10: Do not wait for

dial tone: X0 Do wait for dial tone: <nothing>.

13.Under iLon 10 Settings, you can configure the iLon 10 by doing one of the following:

a.Check Same as for outgoing connection if user name and password are the same as under outgoing connections.

b.Uncheck Same as for outgoing connection if you want to configure the iLON 10 using another user name and password.

In User Name, enter the user name which the iLON 10 uses to allow HTTP access. This information is needed to allow ARENA making configuration changes to the iLON 10. In the iLON 10 configuration (section "Security"), this setting will be stored as user name for HTTP access.

In Password, enter the password which the iLON 10 uses to allow HTTP access. This information is needed to allow ARENA making configuration changes to the iLON 10. In the iLON 10 configuration (section "Security"), this setting will be stored as password for HTTP access.

c.To set the iLON 10 to factory default, click Factory default icon .

To configure the iLON 10, click Advanced icon which shows the iLON 10 configuration pages.

NOTE:

Do not change configuration settings here, unless absolutely necessary. Refer to the "Cross Reference of iLON 10 Settings and ARENA Settings" section. The settings have to match, otherwise, the supervisor ARENA cannot contact the iLON 10.

14.Click OK button. The iLON 10 configuration data are sent to the iLON 10. Note that only if the iLON 10 has been reached and configured successfully, ARENA saves the site configuration.

53

EN2Z-0906GE51 R0708

Page 53
Image 53
Honeywell EN2Z-0906GE51 R0708 manual Wait for dial tone before calling