HP M1300 manual Front Cover First Other Pages Last Back Cover, Front Cover and Back Cover options

Select the Use Different Paper/Covers check box to make the following settings appear in the group box, along with associated options:

●Front Cover

●First Page

●Other Pages

●Last Page

●Back Cover

To use Use Different Paper/Covers options, configure the setting for the print job. Each option for the Use Different Paper/Covers setting is described in the sections that follow this procedure. Use the following instructions to configure the setting.

To configure the Use Different Paper/Covers options for a print job

For each option, set a different tray by using the Source Is: drop-down menu. For some options, the

Type is: drop-down menu is also available.

1.To use different media or cover stock, select the Use Different Paper/Covers check box. A list of options appears in the dialog box. The full set of selections is visible by using the down arrow button to the right of the list to scroll.

2.To use different paper for the pages within the print job, select the appropriate option (Front Cover, First Page, Other Pages, Last Page, or Back Cover) in the dialog box. A check mark appears to the left of the option when a setting is changed using the Source is: or Type is: drop- down menus.

3.Click OK to print.

NOTE: Use the same media size for the entire print job. All options selected from the available Use Different Paper/Covers options use the size selected in the First Page settings.

When you change the type and source of the media and covers, the settings remain configured until you close the software program.

Each option for the Use Different Paper/Covers setting is described in the following sections.

Front Cover and Back Cover options

Use these options to include a blank or preprinted front cover or back cover on a document.

The Front Cover and Back Cover options are as follows:

●Add a Blank or Preprinted Cover check box

●Source is: drop-down menu

●Type is: drop-down menu

When you select Front Cover or Back Cover, also select the Add a Blank or Preprinted Cover check box to enable the setting. When this check box is selected, the Source is: and Type is: drop-down menus become available and a check mark appears next to the Front Cover or Back Cover option.

ENWW Printer driver tabs 117