Table 6-6 Update messages
Product message | Explanation |
|
|
RECEIVING UPGRADE | This message appears from the time the product recognizes the beginning of |
| an .RFU update until the time the device has verified the validity and integrity of |
| the .RFU update. |
| NOTE: If the remote firmware update process is interrupted before the firmware |
| is downloaded (while RECEIVING UPGRADE appears on the |
| display), the firmware file must be sent again. No message appears on the product |
| control panel to indicate that the update was interrupted. |
|
|
PERFORMING UPGRADE | This message appears while the product is reprogramming the firmware. |
| NOTE: If power is lost during the flash DIMM update (while PERFORMING |
| UPGRADE appears on the |
| the message RESEND UPGRADE appears on the |
|
|
INITIALIZING | This message appears from the time that the product has finished reprogramming |
| the DIMM until the device reinitializes. |
|
|
RESEND UPGRADE | This message appears (in English only) if the firmware update fails because the |
| RFU process is interrupted. It can also occur if firmware for accessories (such as |
| the duplex unit or an output device becomes is corrupted. Perform another update. |
|
|
RFU LOAD ERROR | This message appears (in English only) if the firmware update fails because the |
SEND RFU UPGRADE | |
| |
|
|
NOTE: To verify that the firmware update succeeded, print a new configuration page from the control panel and verify that the firmware date code on the configuration page has changed.
ENWW | Remote firmware updates 173 |
