IBM 4.3-W Appendix B: UBA Parameters Reference (443, Topology Editor)

Netcool/Proviso Cisco IP Telephony Technology Pack User’s Guide, Version 4.3-W 457

Appendix B: UBA Parameters Reference (443, Topology Editor)

This appendix provides Unix reference pages for each of the pack-specific UBA parameters supplied with the

XSD file for the Cisco IP Telephony Technology Pack. The descriptions are the same as those that display in the

Topology Editor Help. These reference pages are provided as a convenience.

The following pages provide a reference of the UBA parameters that this technology pack provides. The reference

pages have the following sections:

•Parameter name. Each reference page begins with the parameter name. Parameter names use the following

syntax:

[<instance>.][<schema>.]<parameter_name>

where:

— <instance> — Specifies the group alias, which is typically a string that represents the name of the

technology pack.

— <schema> — Specifies the string passed to the input schema object referenced in the pack’s Bulk Adaptor Design

(JavaScript) file.

— <parameter_name> — Specifies the name of the parameter.

In the Detail sections of the reference pages, parameter names in the descriptions are typically referenced as

<schema>.<parameter_name> or simply <parameter_name>. The descriptions do not reference the <instance> part

of the parameter name.

•Description. A short description that identifies the purpose of the parameter.

•Component. The DataChannel application (component) to which the parameter applies. The value

specified for this parameter controls the behavior of this DataChannel application. This section can contain

the following values:

— BLB — Specifies the DataChannel BLB (Bulk Load Balancer) application.

— IF — Specifies the DataChannel Inventory File (IF) application. Examples of IF applications include:

* SAMIF — Specifies the IF application for the Alcatel 5620 SAM Technology Pack.

* QCIF — Specifies the IF application for the Alcatel 5620 NM Technology Pack.

— UBA — Specifies the DataChannel UBA (Universal Bulk Adaptor) application.

Most UBA technology packs operate with only the UBA application.

•Valu e. Specifies the following information:

— Default — Identifies the default value, if one is specified, for the parameter.

— Attribute — Specifies whether the parameter is writable.

— Location — Specifies the location of the parameter in the Topology Editor.