Appendix A: Configuration

Field

Description

 

 

 

 

[Data Source Name]

The configuration of the specified data source.

 

[Data Source Name]: for example, [SANFRANCISCO]

 

Address: the remote IP address and TCP port of the CallManager Publisher

 

Database (for example, 192.168.1.1,1433). To verify the remote connection

 

configuration, establish the connection manually from a shell window: telnet

 

xx.xx.xx.xx 1433 or telnet xx.xx.xx.xx 1370. The remote TCP

 

port can be 1433 or 1370 according to the SQL Server configuration.

 

 

[ODBC]

A global section that defines the global environment for the bridge.

 

 

Important: If you do not have a CUCM environment, skip Step 6 through Step 9, and continue with Step 10.

6.CUCM environment only: On the DataChannel host, create a directory for each CUCM server from which CDR, CMR, and Perfmon data files will be requested. For example, if you will be requesting data files from two CUCM servers, you might create the following directories:

/opt/datachannel/cucm1

/opt/datachannel/cucm2

These directories will contain the ProvisoCUCM application and other files needed to send SOAP requests to each CUCM server.

Note: If you will be requesting CDR and CMR data files through a master CUCM server, you need to create just one directory for those requests. However, if you will be requesting Perfmon data, you must create a separate directory for each CUCM server from which you will request Perfmon data.

7.CUCM environment only: Copy the following files into each one of the directories you just created in Step 6:

ProvisoCUCM.jar

cucm.properties

startcucm.sh

stopcucm.sh

These files were included in the technology-specific files you copied to DATA_CHANNEL_HOME/scripts in step 2-e on page 441.

8.CUCM environment only: Configure each of the cucm.properties files you copied in Step 7.

Each cucm.properties file is associated with an instance of the ProvisoCUCM application that resides in the same directory as the file. The ProvisoCUCM instance reads the cucm.properties file to find the address and login credentials of the associated CUCM server, the address and login credentials of the DataChannel host for the CUCM server to use when pushing the requested files via FTP back to the DataChannel host, and other required configuration details.

The following table describes the fields in the cucm.properties files:

Field

Description

cucm.host

The IP address of the CUCM server associated with this properties file.

 

Examples: cucm.host=10.1.2.3

 

cucm.host=cucm.mycorp.com

cucm.port

The port number for SOAP requests sent to the CUCM server.

 

Example: cucm.port=443

444

Netcool/Proviso Cisco IP Telephony Technology Pack User’s Guide, Version 4.3-W

Page 466
Image 466
IBM 4.3-W manual Port number for Soap requests sent to the Cucm server, Example cucm.port=443