5. Using the instructions that came with the drive, check that any switches or jumpers on the drive are set correctly.

6.With the drive handle pivoted to the open position, insert the drive carrier completely into the selected drive bay.

Note: It is important to ensure that the drive carrier is inserted firmly into the connector located in the rear of the bay.

7. Pivot

the

drive

handle completely to the left until the drive handle locks and the

drive

is

firmly

seated.

8. If you have another drive to install, do so now. If not, continue with step 9.

9. Replace the

drive bay

cover. Align the two notches

on the left side of the drive

bay cover with the cover of the server. Pivot the

cover to the right until it is

reinstalled,

and tighten

the thumbscrew.

 

4-307046 Model B50 User's Guide

Page 122
Image 122
IBM manual Model B50 Users Guide