Setting the SCSI Security Jumpers

Before you begin:

Ÿ Read the “Laser Safety Information” on page xiv.

ŸRead “Safety Considerations” on page 4-2 and “Handling Static Sensitive Devices” on page 4-3.

Ÿ Remove the server cover (see “Removing the Cover” on page 4-4).

To increase server security, the external SCSI connector can be disabled by changing jumpers inside the server.

1. Locate the SCSI security jumpers in the following figure.

J35

J36

2.

Remove the

riser

card

bracket

to

access

the

jumpers. See “Removing the Rise

Card

Support

Bracket” on

page 4-34.

 

 

 

3.

To

disable

the external

SCSI

connector, move

the

jumper on J35 to the front

pins,

and move the

jumper

on

J36

to

the rear two pins.

Chapter 4. Installing and Removing4-33Options

Page 125
Image 125
IBM B50 manual Setting the Scsi Security Jumpers, Before you begin