7046 Model B50 User's Guide
1. At the system prompt, stop the operating system using the proper command for your operating system.
2. After the operating system is stopped, turn off the server.
3. Go to “Step 6.”
Do the following to shut down your system:
Go to “Step 5.”
Do you want to run the Online diagnostics in Service mode?
NO
YES
Step 4
Diagnostic tests can be run on many resources while the operating system is running. However, more extensive problem isolation is obtained by running Online diagnostics in Service mode.
Go to “Step 4.”
YES
Verify with the system administrator and users that the server may be turned off. If so, then turn off the server and go to “Step 6.”
NO
The server must be turned off in order to run diagnostics.
Step 3
Determine if the operating system is accepting commands.
Is the operating system accepting commands?