Display Software Product Data
This task invokes SMIT to display information about the installed software and
provides the following functions:
List Installed Software
List Applied but Not Committed Software Updates
Show Software Installation History
Show Fix (APAR) Installation Status
List Fileset Requisites
List Fileset Dependents
List Files Included in a Fileset
List File Owner by Fileset
Display System Environmental Sensors
This service aid displays the environmental sensors implemented on a CHRP
system. The information displayed is the sensor name, physical location code, literal
value of the sensor status, and the literal value of the sensor reading.
The sensor status can be any one of the following:
Normal – The sensor reading is within the normal operating range.
Critical High – The sensor reading indicates a serious problem with the device.
Run diagnostics on sysplanar0 to determine what repair action is needed.
Critical Low – The sensor reading indicates a serious problem with the device.
Run diagnostics on sysplanar0 to determine what repair action is needed.
Warning High – The sensor reading indicates a problem with the device. This
could become a critical problem if action is not taken. Run diagnostics on
sysplanar0 to determine what repair action is needed.
Warning Low – The sensor reading indicates a problem with the device. This
could become a critical problem if action is not taken. Run diagnostics on
sysplanar0 to determine what repair action is needed.
Hardware Error - The sensor could not be read because of a hardware error.
Run diagnostics on sysplanar0 in problem determination mode to determine what
repair action is needed.
Hardware Busy – The system has repeatedly returned a busy indication, and a
reading is not available. Try the service aid again. If the problem continues, run
diagnostics, on sysplanar0 in problem determination mode to determine what
repair action is needed.
Chapter 9. Introducing Tasks and Service Aids 9-17