IBM B50 Using the CD-ROM Drive

Using the CD-ROM Drive
CAUTION:
A Class 3 laser is contained in the device. Do not attempt to operate the device
while it is disassembled. Do not attempt to open the covers of the device, as it
is not serviceable and is to be replaced as a unit.
The CD-ROM is located in bay 2 of the server. Your CD-ROM drive looks like the
one shown in the illustration, and the controls are located as indicated.
1 Headphone jack
2 Volume control
3 Status Light
4 Tray opening
5Emergency eject access
6 Load/unload button
When the CD-ROM is set to On, the status light indicates one of several conditions.
The following are status light states and the respective conditions of the CD-ROM
drive:
Off during standby with the CD-ROM loaded or unloaded
Blinks from the closing of the tray to completion of initialization
Blinks slowly when either the lens or disc is dusty
Blinks quickly when in the audio mode
Lights during data transfer operations
Lights steadily when some condition exists that should be checked.
Chapter 2. Using the Server 2-17