IBM B50 manual PCI RAID Physical Disk Identify, Process Supplemental Media, Run Diagnostics

The service aid provides the following functions:

Ÿ	Add or	delete a resource to the				periodic test list
Ÿ	Modify	the	time to test a resource
Ÿ	Display	the	periodic test		list
Ÿ	Modify	the	error	notification mailing		list
Ÿ	Disable	or	Enable	Automatic	Error Log	Analysis

PCI RAID Physical Disk Identify

This selection identifies physical disks connected to a PCI SCSI-2 F/W RAID adapter.

This task may be run directly from the AIX command line. The following usage statement describes the syntax of the command:

Usage

diag -c -d < pci RAID adapter > -T identify

Process Supplemental Media

Diagnostic Supplemental Media contains all the necessary diagnostic programs and

files required to test a particular resource. The supplemental is normally released and shipped with the resource as indicated on the diskette label. Diagnostic Supplemental Media must be used when the device support has not been

incorporated			into	the latest diagnostic CD-ROM.
This	task processes the Diagnostic Supplemental									Media. Insert the supplemental
media	when prompted, then press Enter. After processing has occurred, go to the
Resource		Selection		list	to	find the	resource			to test.
Notes:
Ÿ	This task is supported in Standalone Diagnostics only.
Ÿ	Process		and	test	one	resource	at	a	time.
Ÿ	Do	not	process multiple supplementals					at	a	time.

Run Diagnostics

The Run Diagnostics task invokes the Resource Selection List menu. When the commit key is pressed, Diagnostics are run on all selected resources.

9-267046 Model B50 User's Guide