Step 12
Did | the Diagnostic | Selection | Menu | display? |
|
|
|
NO | IfProblem | Determination | was | selected from the Diagnostic Mode | |||
| Selection menu, and if a | recent error | has | been logged in the error log, the | |||
| diagnostics | automatically | begin testing | the | resource. | ||
Follow the displayed instructions and do one of the following:
Ÿ If the No Trouble Found screen is displayed, press Enter.
Ÿ If another resource is tested, repeat this step.
Ÿ If the Diagnostic Selection menu is displayed, go to “Step 12.”
Ÿ If an SRN is displayed, record it, and go to “Step 14.”
YES Go to “Step 13.”
Step 13
The system checkout option checks most of the configured adapters and devices.
Notes:
1. System checkout is only supported in Online Diagnostics in Service Mode.
2.ISA adapters cannot be detected by the system. The ISA adapter Configuration Service Aid allows the identification and configuration of ISA adapters for Standalone Diagnostics. ISA adapters must be identified and configured before they can be tested.
Select and | run the | diagnostic | tests | on the | resources you are | having problems with or | ||||
run | system | checkout | to | check | all | of | the | configured resources. | Find the response in | |
the | following table | and | take | the | action | for | it. |
| ||
