Step 16

This step loads the Standalone Diagnostics. If you are unable to load the diagnostics, go to “Step 7.”

1. Set the power to on.

2. Insert the diagnostic CD-ROM into the CD-ROM drive.

3.When the keyboard indicator starts blinking, press the F5 key on the direct attached keyboard or number 5 on the ASCII keyboard to indicate that diagnostics are to be loaded.

4.Enter any requested passwords.

5. Follow any instructions to select a console.

Did the

Diagnostics

Operating

Instructions display without any obvious display

problem?

 

 

 

 

NO

Go

to

“Step

7.”

YES

Go

to

“Step

9.”

Step 17

The

diagnostics

did not find a hardware problem. If you still have a problem, contact

your

software

support center.

8-107046 Model B50 User's Guide

Page 166
Image 166
IBM B50 manual Diagnostics