6. Enter | any | passwords. |
|
|
| |
Diagnostics loaded from | ||||||
default | boot | list | checks | the | drive before the disk drive, this procedure is | |
used to start standalone diagnostics. | ||||||
Booting in | Service | Mode | from the | Custom | Boot | List |
To boot in service mode from the custom boot list, do the following:
1. Before stopping the programs and operating system, notify your system administrator and users that the server is going to be shut down.
2. Turn off the server.
3. Wait 30 seconds, then turn on the server.
4.When the keyboard indicator appears during startup, press the F6 key if the system console is a directly attached keyboard, or the 6 key if the system
console is an ASCII terminal.
5. Enter any passwords.
Diagnostics | loaded | from a | disk | drive | or | networkonline diagnosticsarecalled. | (Online | ||
diagnostics | can | be | used | only | if | AIX | is | installed.) Because | the custom boot list lists |
the disk drive | or | network | device | before | the | this procedure is used to | |||
start online diagnostics. To ensure that using the custom boot list starts online | |||||||||
diagnostics, | do | not | insert | the | diagnostics |
|
|