Step 2. Loading the Diagnostics
1. Stop all application programs running on the operating system.
2.Stop the operating system.
3.Turn the power off.
4.If you are loading the Standalone Diagnostics and running them from an ASCII
terminal, do the following:
ŸThe attributes for the terminal must be set to match the defaults of the diagnostics.
Ÿ If | you need to change any | settings, record | the normal settings, and be sure | |||
the | terminal | attributes | are | set | to work with | the diagnostics. If needed, see |
“Running the | Diagnostics | from | a TTY | Terminal” on | page |
Ÿ Proceed to substep 5 when you finish checking the attributes.
5. Turn the power on.
a. When theKeyboard indicator appears, press the 5 key on the keyboard to load the Standalone Diagnostics or press the 6 key to load the Online Diagnostics.
b. Enter any requested passwords.
c. Follow the instructions to select a console.
6. When | the | Diagnostic | Operating | Instructions | display, go | to | “Step 3. | Running | ||||
System | Verification” | on | page | you | are | unable | to | load | the | diagnostics, go | ||
to “Problem | Determination | When | Unable | to Load | Diagnostics” | on | page |