Connecting External Options
Before you begin:
Read “Safety Considerations” on page 4-2 and “Handling Static Sensitive
Devices” on page 4-3.
Install all your internal options.
Read the manual that came with the external options.
1. Prepare the option for installation using the instructions that came with the
option. You might find instructions for:
Setting a SCSI device ID
Removing or installing a SCSI device terminator
Setting jumpers or switches
2. Connect the option to the server as described in the instructions that came with
the option. Refer to the figure on page 1-7 for the specific location for each
connector.
4-40 7046 Model B50 User's Guide