Notes:
a.To configure a remote alert recipient for IBM Director over Modem or IBM Director over LAN, the remote alert recipient must be a server with the Director Management Server installed.
b.The IBM Director over Modem option is supported in only IBM Director versions 2.2.1, 3.1, and 3.1.1.
9.In the Number field, type either the phone number, IP address, or host name at which to reach the recipient. Type a phone number if you are using one of the following notification methods:
v Numeric pager (follow the phone number with a comma and the personal identification number [PIN])
v Alphanumeric pager
v IBM Director over Modem v SNMP over PPP
v
Type an IP address or host name if you are using the IBM Director over LAN method.
10.If you chose alphanumeric pager as the notification method, in the PIN field, enter the PIN.
11.If you selected the
Note: For the
12.If you selected the
For example, to log in to the IBM Global Network® IP Remote Access Service Provider, the PPP login ID should contain information in the following format: secureip.X.Y, where secureip is your service and X is your account name, and Y is your user ID.
Notes:
a.For the SNMP over LAN and SNMP over PPP notification methods to work properly, configure the SNMP options on the Network Protocols page. For information about SNMP, see “Configuring SNMP” on page 38.
b.For an xSeries 330 server: SNMP over LAN and IBM Director over LAN alerts are always forwarded because the ASM processor does not have LAN connectivity.
13.If you selected the
14.Click Save to save your remote alert recipient profile. Repeat step 3 on page 23 through step 13 on page 24 for each remote alert recipient profile.
15.Click Generate Test Alert on the Remote Alert Recipients page to send a test alert to all configured remote alert recipients.