Complete the following steps to remotely access Remote Supervisor Adapters or
ASM processors on the ASM interconnect network:
1. If you have not already done so, start a Telnet session or establish a direct
serial connection.
2. Log in to the Remote Supervisor Adapter. For more information, see “Accessing
the text-based interface through a Telnet connection”on page 65.
3. In the Advanced System Management window, select RemoteASM Access.
The Remote ASM Access window opens, listing other system-management
adapters and processors linked to the host server.
Server 1Server 2Server 3
4. Select a processor or adapter. The Remote ASM Login window opens.
5. Enter your user name and password.
Note: It might take up to 45 seconds for newly attached servers to be reflected
in the table of available remote systems. It might take up to 2 minutes for
systems to be removed from the table when detached from the ASM
interconnect network.
6. The Advanced System Management window opens, giving you access to the
remote system-management adapter or processor.
Note: Some options are not available for all servers.
68 Remote Supervisor Adapter: User’s Guide