Chapter 5. Performing Remote Supervisor Adapter tasks
Use the functions under the Tasks heading in the navigation pane to directly control the actions of the Remote Supervisor Adapter and your server. The tasks you can perform depend on the server in which the Remote Supervisor Adapter is installed.
If the Remote Supervisor Adapter is installed in an xSeries 330 server and you are logged in to the Remote Supervisor Adapter, you can perform the following tasks:
vUpdate the Remote Supervisor Adapter firmware
vAccess other Remote Supervisor Adapters
If the Remote Supervisor Adapter is installed in an xSeries 330 server and you are logged in to the ASM processor, you can perform the following tasks:
vUpdate the ASM processor firmware
vPower on or restart the server
If you are logged in to the Remote Supervisor Adapter that is installed in a server other than an xSeries 330, you can perform the following tasks:
vView server power and restart activity
vRemotely start (boot) a server from a diskette image
vRemotely control the power status of the server
vRemotely access the server graphical console
vView server POST
vView remote blue screen capture
vUpdate firmware
vAccess other Remote Supervisor Adapters
Note: Some features are not available on all servers.
© Copyright IBM Corp. 2001, 2002 | 55 |
