. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-14 Installation (Hardware & Software)— PC
2. Attach the other end of the 50-pin to 50-pin SCSI cable to either of the
identical SCSI ports on the back of the Scanner. Seat the connector
firmly and pinch the wire clamps shut.
3. Attach the SCSI terminator (supplied with the Scanner) to the empty
SCSI port on the Scanner, seat the terminator firmly, and pinch the
wire clamps shut.
4. Continue at “Setting the Scanner SCSI Identification Number” later in
this chapter.
Back of One or More SCSI Devices
Back of PC
Step 2
Back of Film Scanner
Back of One or More SCSI Devices
Back of PC
Step 3
Back of Film Scanner