. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating the KODAK Driver
Follow the steps in this section to use the controls on the KODAK Driver window.
NOTE: As you use the Scanner, the settings you have in effect each time you leave the KODAK Driver are retained and will be in effect the next time you use the driver.
Set the Film Type
1.Set the film type to match your film by choosing the film type from the large number of choices on the FILM drop down list box.
Set the Film Size
2.If the FILM SIZE does not match the film you will scan, choose the correct size from the FILM SIZE drop down list box.
PreScan the Image (and Calibrate the Scanner)
3.Click PRESCAN. When you have completed parts A through E of this step, a color image of the photo currently in position will appear in the KODAK Driver window. You can use this image to determine whether additional adjustments are needed before final scanning. If B & W is on (see below), the prescan appears in
