Kodak RFS 3570 Loading 35 mm Film and Slides, Loading 35 mm Film into the 35 mm Film Holder

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Loading 35 mm Film and Slides

Loading 35 mm Film into the 35 mm Film Holder

Up to six frames from a strip of 35 mm film of any length can be posi- tioned for scanning at one time. Refer to the diagram below to load film into the 35 mm film holder.

LatchLatch

LabelFilm

KODAK RRR 0000 KODAK

A

B

C

D

E

F

Tabs Hinge

1.Use the two latches opposite the hinge to open the 35 mm film holder.

2.Hold the 35 mm film holder in front of you with the label “KODAK RRR 0000 . . . . KODAK” at the top and facing you.

3.Place your 35 mm film into the 35 mm film holder so that:

Images are facing you as you would see them in real life (not mirror-imaged).

Any edge printing on the film is readable from left to right.

4-2  Loading the Film and Slide Holders — Macintosh Computer G