. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.Attach the Scanner to the internally terminated device by plugging one end of your 50-pin to 50-pin SCSI cable into the empty SCSI port on the Scanner and the other end into the empty SCSI port on the terminated device. Seat both connectors firmly and pinch both wire clamps shut.

NOTE: This cable is not supplied with the Scanner but is available through Kodak. Refer to “Appendix I — Optional Equipment & Spare Parts List.” This cable is also widely available from computer retailers; if you obtain a cable from one of these sources, be certain to obtain a high quality cable with a continuous EMI shield over the cable and connectors.

Back of

Macintosh Computer

Back of Film Scanner

Internally

Terminated

Device

Step 5

3-18  Installation (Hardware & Software) — Macintosh Computer G

Page 40
Image 40
Kodak RFS 3570 user manual 18  Installation Hardware & Software Macintosh Computer G