. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the KODAK Driver for Adobe Photoshop (Macintosh) 5-15
Select the Image
6. A. (Optional) Click SELECT.
NOTE: If you have changed the film size, the Scanner must recalibrate
and focus. As prompted by the messages that appear, remove a film
holder if present and place the calibration mask into the Scanner. Follow
additional prompts as they appear to: remove the calibration mask,
replace the film holder (with your film in it), and wait for recalibration
and focusing to complete.
A low-resolution black-and-white scan occurs every two seconds,
with the image displayed in the window. (The SELECT button
changes to STOP SELECT. Scanning will stop automatically after 10
minutes if no additional action is taken.)
B. (Optional) If you are using 35 mm film or slides, and you do not
see the image you want, move the film or slide holder to the left
or right —while scans continue — until you see the image you
want. (Because scanning may occur while you are moving the
holder, you may see blurred images until after you stop moving
the holder.)
C. If you are using film sizes other than 35 mm, and you do not see
the image you want, click STOP SELECT, remove the film holder,
center the desired image in the holder, reinsert the holder, and
click SELECT again.
D. When you see the image you want, click STOP SELECT.
E. Click PRESCAN to obtain a color image in the KODAK Driver
window.