Kodak RFS 3570 user manual Dust removal tool Fiber strip Diffuser

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

time while working with the scanner, clean the scanner “diffuser” (a

3 x 4-inch piece of white plastic), as summarized in this note, and as fully described at the end of “Appendix C — Troubleshooting.”

A.Remove the calibration mask and single frame holder adapter or multi- frame holder.

B.Orient the dust removal tool as shown below, and with an up and down motion, clean the surface of the diffuser making sure the fiber strip makes contact with the diffuser.

Dust removal tool

Fiber strip

Diffuser

KODAK Professional

RFS 3570 Film Scanner

C.Remove the dust tool, replace the mask and holder, and rescan the image.

D.If the problem continues, use the scanner software RECALIBRATE button as described in “Appendix C — Troubleshooting.”

5-22  Using the KODAK Driver for Adobe Photoshop (Macintosh) G