. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Follow these steps if none of the connected devices is terminated internally (and any external terminator found in the SCSI chain has been removed):

NOTE: In the following steps, you will place the Scanner at the end of the chain of connected devices. (You can place the Scanner anywhere in the chain as long as you add a terminator to the last device in the chain.)

1.Attach one end of your 50-pin to 50-pin SCSI cable to the empty SCSI port on the last device in the chain. Seat the connector firmly and pinch the thin wire clamps shut.

NOTE: This cable is not packed with the Scanner but is available through Kodak. Refer to “Appendix I — Optional Equipment & Spare Parts List.” This cable is also widely available from computer retailers; if you obtain a cable from one of these sources, be certain to obtain a high quality cable with a continuous EMI shield over the cable and connectors.

Back of

Macintosh Computer

Step 1

Back of One or More SCSI Devices

3-12  Installation (Hardware & Software) — Macintosh Computer G

Page 34
Image 34
Kodak RFS 3570 user manual 12  Installation Hardware & Software Macintosh Computer G