. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D-2 Messages“CALIBRATION
PROCEDURE
1. If using 35 mm multi-
frame holder, REMOVE
the holder and holder
adapter.
or
If using single-frame
film holder, REMOVE
the holder.
2. INSERT or CONFIRM
that the single-frame
film holder adapter is
in the scanner.
3. INSERT the
CALIBRATION MASK
behind the single-frame
film holder adapter
with the label facing
forward.
4. CLICK OK to begin
calibration.”
The Scanner must
perform a calibration.
Follow the prompts in the
message. Chapters 5 (Macintosh)
and 9 (PC) provide details, with
art work illustrating the parts
mentioned in the message.
Message Possible Cause(s) Suggested Solution(s)