
Macro options (continued)
Use these menu |
| |
options | When you want to customize… | |
|
| |
Character options |
| |
(continued) | This setting enables or disables the | |
Note: Available for | provides compatibility with other IBM printers. | |
• When set to Enable, switching from 12 cpi to condensed | ||
the 2480/2481 printers | ||
only. | (Dec 15, Hex 0F) changes the pitch from 12 cpi to 20 cpi. | |
• When set to Disable, switching from 12 cpi to condensed | ||
| ||
| (Dec 15, Hex 0F) does not change the pitch. | |
|
| |
Paper handling | Auto Tear Off | |
options | • When set to On, Auto Tear Off moves continuous form | |
| ||
| paper to theTear Off bar. | |
| • When set to One Second, continuous form paper | |
| automatically advances to theTear Off bar after a one | |
| second delay in receiving data. | |
| • When set to Off, you can manually advance the | |
| perforation of a continuous form to the Tear Offbar. |
Auto Cut Sheet Load
•When set to On, paper is loaded into the manual feed tray, the printer automatically loads the paper to the current
•When set to Off, press FormFeed to load paper.
Auto Sheet Feeder
If you installed the optional Auto Sheet Feeder, turn the Auto Sheet Feeder setting On to automatically load paper into the printer.
Tractor
Lets you select the default tractor if the optional tractor is installed. Selecting Tractor 1, Tractor 2, or Tractor 1+ 2 makes the specified tractor or tractor set the default.
Form Length
You may set the form length (in lines per page) from one line to a maximum of 22 inches.
Using Setup mode
97