Initialize printer to EU defaults
The standard defaults for Europe are:
•Code page: 858
•Character Set: 2
•Form length: 12”
To change the defaults:
1Make sure paper and the ribbon cartridge are installed.
2Turn the printer Off.
3Open the ribbon access cover.
4Move the printhead toward the operator panel side of the printer until it stops.
5Close the ribbon access cover.
6Press and hold Tear Off + Tractor while you turn the printer On.
7Continue holding these buttons until the carrier moves.
Note: The operator panel lights blink On and Off several times.
Once the carrier moves, your settings have been reset to factory defaults.
Troubleshooting
